Maintenance method of pipe bender parts

Views: 107 Author: Site Editor Publish Time: Origin: Site

    The daily use and maintenance of the various components of the pipe bender are different. When installing the pipe bender, the elbow and elbow can be directly installed on the elbow pipeline in accordance with the specified connection method.

220-220606822b2259c6.JPG

    The first is the elbow bend of the pipe bender. Elbows and elbows placed for a long time should be inspected regularly. The surface of some exposed elbows should be kept daily, clean up the dust and dirt in time, and store them in a ventilated and dry place indoors. Keep the elbow dry and tidy, keep the pipe cleaner clean and tidy, and store it accurately according to the storage method provided by the manufacturer.

    One more thing to note is that the elbow and elbow of the pipe bender can only be installed horizontally, because the elbow medium flows upward along the vertical valve flap.

    In addition, if the bending speed of the pipe bender is too fast, the bending part of the pipe will be flat, and the bending degree will not meet the requirements. If the speed is too slow, it is easy to cause the catheter to wrinkle or deform.

220-2206050c3eeef19e.jpg

    Under normal circumstances, there are no special regulations for the installation position of the elbow, and it can be placed in any position of the pipeline, as long as it is convenient for operation and inspection. The fullness requirements of the inner R and outer R points of the bending arc of the pipe bender are not too high, and the bending arc point must have an inner lining diameter. The double-headed pipe bender cannot add a mandrel when bending the pipe, so it is not feasible for the pipe that generally requires the bending curvature and fullness.